I don't know how much you know about potassium hydroxide products. There is a method called membrane electrolysis for the production of potassium hydroxide products. The production process of this method and the products produced by this method can be used in what areas. Here is a detailed description for you.

　　膜電解的原料氯化鉀在鹽浴中溶解到飽和溶液中。加熱90℃時單獨加入碳酸鉀。苛性鉀。氯化鋇除去鈣。雜質，如鎂和硫酸鹽。沉降除渣。鹽酸中和。氯化鉀溶液280 ~ 315g/L預熱70 ~ 75℃電解。得到氫氧化鉀。

　　The raw material of membrane electrolysis, potassium chloride, is dissolved into saturated solution in salt bath. Potassium carbonate is added separately when heated to 90 C. Caustic potash. Barium chloride removes calcium. Impurities, such as magnesium and sulfate. Settlement slag removal. Hydrochloric acid neutralizes. Potassium chloride solution is preheated from 280 to 315 g/L to 70 to 75 ~C for electrolysis. Potassium hydroxide is obtained.

　　膜法測定氫氧化鉀的濃度為10% ~ 11%。制備了含45% ~ 50%氫氧化鉀溶液。還可以繼續熬堿鍋濃度。脫色。得到了固體氫氧化鉀。或切片產品。

　　The concentration of potassium hydroxide determined by membrane method is 10%-11%. Potassium hydroxide solution containing 45%-50% was prepared. Can also continue to boil alkali pot concentration. Decolorization. Solid potassium hydroxide was obtained. Or sliced products.

　　氫氧化鉀的性質好，在產品使用方面，由于性質較多，在許多方面和檢驗實驗方面都有很好的應用，本文下面就為大家詳細說明這種材料溶液型檢驗方法，大家一起來了解一下。

　　Potassium hydroxide has good properties, in the use of products, because of its many properties, it has a good application in many aspects and testing experiments. Here, we will explain the method of solution type testing for this material in detail. Let's get to know it together.

　　1. 用橙色衛生棉條去除皮膚損傷。

　　1. Remove skin damage with orange tampons.

　　2. 用玻璃片的邊緣刮去皮膚的重要部分，然后將殘留物或殘留物涂抹到另一個玻璃物體上。

　　2. Scrape important parts of the skin with the edge of the glass sheet, and then apply the residue or residue to another glass object.

　　良好的取樣部位是:(1)瘢痕根部的內部或底部，(2)腳趾之間柔軟或分泌的區域，(3)受損的邊緣，(4)毛發的底部。

　　Good sampling sites are: (1) inner or bottom of scar root, (2) soft or secretory area between toes, (3) damaged edge, (4) bottom of hair.

　　3.將1滴10%氫氧化鉀和殘渣或殘渣混合在盤中。

　　3. Mix 1 drop of 10% potassium hydroxide with residue or residue in a tray.

　　4. 溶栓調頻開關。倒蠟(由于油蠟易沉淀氫氧化鉀結晶)，使其固定。

　　4. Thrombolytic frequency modulation switch. Inverted wax (because oil wax precipitates easily the crystallization of potassium hydroxide) makes it fixed.

　　5. 在低照度下使用10x和40x鏡頭進行透視。

　　5. Use 10x and 40x lenses for perspective at low illumination.

　　6. 錢越少，效果越好。

　　6. The less money, the better the effect.

　　7. 氫氧化鉀溶解表皮蛋白，但不破壞霉菌成分。霉菌不分散，殘留在角質層膜之間。

　　7. Potassium hydroxide dissolves epidermal proteins, but does not destroy fungal components. The fungi were not dispersed and remained between the cuticle membranes.

　　綜上所述，本文闡述的七點是氫氧化鉀溶液的模具檢測方法。當你應用這個產品時，如果你想檢查這個產品的屬性，你可以使用這個方法。我希望本文所解釋的內容對您有所幫助。

　　In summary, the seven points described in this paper are the method of mould testing for potassium hydroxide solution. When you apply the product, you can use this method if you want to check the attributes of the product. I hope the explanations in this article will be helpful to you.