Potassium hydroxide can be divided into solid, solution, powder and other forms according to the different needs of various industries. In order to facilitate transportation and storage, we will choose to package it. So what are the packaging methods of potassium hydroxide?

1.固體塊狀的采用GB/t325.2-2010直口鋼桶包裝，其規格尺寸符合GB/t325.2-2010的要求，鋼桶厚度符合GB/t325.2-2010輕型鋼桶的要求。每桶凈含量分別為50kg、100kg、150kg、200kg。

1. The solid block is packed in straight steel drum (GB / T 325.2-2010), and its specification and dimension meet the requirements of GB / T 325.2-2010, and the thickness of steel drum meet the requirements of light steel drum (GB / T 325.2-2010). The net content of each barrel is 50kg, 100kg, 150kg and 200kg respectively.

2.固體薄片產品分兩層包裝。內包裝采用聚乙烯塑料薄膜袋，外包裝采用聚丙烯薄膜編織袋。每袋凈重分別為25kg、40kg和50kg。每袋的容器尺寸和凈含量可根據用戶要求協商。包裝時，內層用尼龍繩或其他同等質量的繩索捆扎，外層編織袋用縫紉機縫制。縫制牢固，無跳線漏縫。

2. Solid sheet products are packed in two layers. Polyethylene plastic film bag is used for inner package and polypropylene film woven bag is used for outer package. The net weight of each bag was 25kg, 40kg and 50kg respectively. The container size and net content of each bag can be negotiated according to the user's requirements. When packing, the inner layer is bound with nylon rope or other ropes of the same quality, and the outer woven bag is sewn with a sewing machine. The sewing is firm and there is no jumper leakage.

3.固體片狀的也可以采用雙層包裝。內包裝采用厚度不小于0.1mm的聚乙烯塑料薄膜袋，外包裝采用GB/T？全開口鋼桶中的直開口鋼桶？325.2-2010，規格尺寸符合GB/t325.2-2010，鋼桶厚度符合GB/t325.2-2010。每桶凈含量為50kg或100kg。包裝時，內袋用維綸繩或其他同等質量的繩索捆扎，鐵桶和端部用吊環固定，保障端部整體不松不牢。

3. Solid flakes can also be packed in double layers. Polyethylene plastic film bag with thickness not less than 0.1 mm shall be used for inner package, and GB / T? Straight open drum in full open drum? 325.2-2010, the specifications and dimensions conform to GB / t325.2-2010, and the thickness of steel drum conforms to GB / t325.2-2010. The net content of each barrel is 50kg or 100kg. When packing, the inner bag is bound with vinylon rope or other ropes of the same quality, and the iron bucket and the end are fixed with rings to ensure that the end is not loose.

4.溶液采用鐵路罐車或公路罐車、鐵桶運輸。槽車上口用鐵皮蓋緊卡緊。

4. The solution is transported by railway tanker or road tanker or iron bucket. The upper port of the tank car is tightly covered with iron sheet.

5.每袋的容器尺寸和凈含量可根據用戶要求協商。

5. The container size and net content of each bag can be negotiated according to the user's requirements.

好了，關于氫氧化鉀的包裝方式就與大家分享到這里，有什么問題想了解可詳細咨詢濟南金昊化工有限公司將竭誠為您服務。

OK, let's share with you about the packaging method of potassium hydroxide. If you have any questions, please consult Jinan Jinhao Chemical Co., Ltd. for details. We will serve you wholeheartedly.