Potassium hydroxide generally needs to be transported to the conveyor to transport the materials. In addition, it also needs to be transported to the conveyor when packaging. However, sometimes some larger lumps may be mixed into the transported materials, so what should be done to avoid the blockage of the conveyor.

我們在想辦法避免輸送機出現堵塞情況之前需要了解一下可能會導致堵塞的一些情況，比如說操作的時候沒有按照正確的方法來進行操作那么可能會導致堵塞，還有就是進行輸送的物料輸送過大導致設備負載運轉那么設備再承受不住的時候就可能會導致出現堵塞的情況，所以一般正常情況下使用的時候只需要控制好輸送的氫氧化鉀一般都是不會出現堵塞情況的，不過也是需要避免出現設備空轉沒有物料進行輸送的情況，因為在這種情況下雖然不會導致出現堵塞的情況，但是會直接的對設備軸承造成比較嚴重的損壞。

Before we think of ways to avoid the blockage of the conveyor, we need to understand some situations that may lead to the blockage. For example, if we do not operate according to the correct method, it may lead to the blockage, In addition, if the conveying material is too large, the equipment will run under load, and the equipment will be blocked when it can no longer bear it. Therefore, under normal conditions, it is only necessary to control the conveying potassium hydroxide well, and the blockage will not occur. However, it is also necessary to avoid the situation that the equipment is idling and there is no material for conveying, Because in this case, although it will not lead to blockage, it will directly cause more serious damage to the equipment bearing.

氫氧化鉀

Potassium hydroxide

而在使用的時候控制好添加物料的輸送其實就是非常重要的，但是其實我們都是知道如果人工進行添加的話這個計量是很不好控制的，所以在這一種情況下我們就可以選擇安裝一個給料器就可以很好的調整添加的計量。

In fact, it is very important to control the conveying of the added materials when using them. However, we all know that the metering is not easy to control if adding materials manually, so in this case, we can choose to install a feeder to adjust the metering.

上面介紹的就是氫氧化鉀怎么避免輸送機堵塞，因為如果有某一個部分出現了卡殼其實對于整個流程來書都是會有阻礙的。

The above is how to avoid the conveyor blockage of potassium hydroxide, because if there is a certain part of the jam, in fact, the whole process will be hindered.